- parabolic_reflector_volumetric.jpg (477.89 KiB) Viewed 4647 times

- boxy_laser.jpg (428.54 KiB) Viewed 4647 times

I think I squashed the worst bugs. This is fun stuff.

A perfectly parallel beam send through a scattering medium. The sphere is made of a much denser medium. It is sub surface scattering with brute force BDPT.
I threw a "real world" scene at it. Thinking about how else I could exploit volume caustics in lack of refractive materials, I figure it would be cool to build a solar thermal power plant model.

Modelled in Stud.io and Cinema 4D.

677761 Triangles, most of them occluded due to the bricks being stuck in each other.

8700 SPP in 34 h

The scene is contained in a box with a scattering medium, obviously. Fireflys due to SDS paths? I'm not sure, but I suppose there can be paths from camera to mirror to volume scattering to mirror to sun. The sun spans a small solid angle, so there is a non-zero chance to hit it with a "forward path" like that and it would be the only technique in Veach's sense to generate the path. Makes sense?

There is also some sort of "light leak" on the first mirror. EDIT: Hm .. after some testing the strange "leak" appears to be no bug after all. I'll write it off as caustic cast by the mirror behind the one with the "leak".

Here is another shot. Moved the rear mirror a bit to see more of the caustics. Tuned down brightness. Converges and looks like normal illumination.

Modelled in Stud.io and Cinema 4D.

677761 Triangles, most of them occluded due to the bricks being stuck in each other.

8700 SPP in 34 h

The scene is contained in a box with a scattering medium, obviously. Fireflys due to SDS paths? I'm not sure, but I suppose there can be paths from camera to mirror to volume scattering to mirror to sun. The sun spans a small solid angle, so there is a non-zero chance to hit it with a "forward path" like that and it would be the only technique in Veach's sense to generate the path. Makes sense?

There is also some sort of "light leak" on the first mirror. EDIT: Hm .. after some testing the strange "leak" appears to be no bug after all. I'll write it off as caustic cast by the mirror behind the one with the "leak".

Here is another shot. Moved the rear mirror a bit to see more of the caustics. Tuned down brightness. Converges and looks like normal illumination.

Your explanation makes sense. Looks very nice! I like the planar laser beam.

Thank you beason!

Actually there was a bug. I wrongly assumed that pdfs for BSDF sampling are symmetric which they are clearly not. p(wi,wo) = p(wo,wi)? No! no! Ah well, how does one say, assumptions are the mother of all f'ups. I finally realized my mistake when ...

I implemented statistical tests (chi-sqr and t-test) for my scatter functions in the style of PBRT and Nori. I found it quite tricky. Because the chance to have at least one false alarm grows quickly with the number of tests. On the other hand, if the threshold for the p-value is made too low one runs the risk of false negatives. My solution is to change the RNG seed rather than lowering the p-value.

Still have trouble with the microfacet BSDF. I get bad number of samples at the edge of a bin where incidentally wi*h = wo*h = 0. At that place the pdf also seems to diverge because of a 1/|wi*h| term. I'm unsure if bug or not. Probably not. The material looks okay ...

Actually there was a bug. I wrongly assumed that pdfs for BSDF sampling are symmetric which they are clearly not. p(wi,wo) = p(wo,wi)? No! no! Ah well, how does one say, assumptions are the mother of all f'ups. I finally realized my mistake when ...

I implemented statistical tests (chi-sqr and t-test) for my scatter functions in the style of PBRT and Nori. I found it quite tricky. Because the chance to have at least one false alarm grows quickly with the number of tests. On the other hand, if the threshold for the p-value is made too low one runs the risk of false negatives. My solution is to change the RNG seed rather than lowering the p-value.

Still have trouble with the microfacet BSDF. I get bad number of samples at the edge of a bin where incidentally wi*h = wo*h = 0. At that place the pdf also seems to diverge because of a 1/|wi*h| term. I'm unsure if bug or not. Probably not. The material looks okay ...

I haven't had implemented a refractive material till now. That needed to be rectified badly.

Not too shabby, I suppose.

(Although, since SDS paths are not rendered, parts are missing. I.e. in lower row, areas behind the glass. And top right, the beam behind the glass.)

Not too shabby, I suppose.

(Although, since SDS paths are not rendered, parts are missing. I.e. in lower row, areas behind the glass. And top right, the beam behind the glass.)

Meanwhile I switched to Embree. Now the renderer feels quite a bit faster. I didn't measure because my data structures had to go out of principle because they were so bad. Still have something to do about the mess I made with mixed double and float calculations that I now have ... But things seem to work again.

The new pic also shows smooth shading which wasn't implemented for BDPT when I made the first version of that pic.

The new pic also shows smooth shading which wasn't implemented for BDPT when I made the first version of that pic.

Went for a pretty low hanging fruit: Importance sampled hdr skydomes!

Hello guys,

I continued working on my renderer for a bit. I added support for emissive media to my path tracing algorithms.

At the moment it can only render that particular demo medium shown in the image below. The issue is that I'm missing a general volume representation which would allow for sampling of light path start points within it. At the moment the spherical geometry is hard coded in the demo medium.

Apart from that I want to integrate OpenVDB eventually. With that I'd get a very powerful grid representation and a data loader practically for free

Here is the image. The medium emits Black-body radiation aka. the Planck spectrum at the given temperature. I also varied the density.

I continued working on my renderer for a bit. I added support for emissive media to my path tracing algorithms.

At the moment it can only render that particular demo medium shown in the image below. The issue is that I'm missing a general volume representation which would allow for sampling of light path start points within it. At the moment the spherical geometry is hard coded in the demo medium.

Apart from that I want to integrate OpenVDB eventually. With that I'd get a very powerful grid representation and a data loader practically for free

Here is the image. The medium emits Black-body radiation aka. the Planck spectrum at the given temperature. I also varied the density.

Here are some new results from my renderer. I've been messing with photon mapping ...

Check if physics are working as intended. The beam is supposed to be focused like that. I let the construction of the scene be guided by the so called Lensmaker's equation https://en.wikipedia.org/wiki/Lens_(opt ... s_equation. More or less brute-force monte-carlo SSS. Spectral rendering! The spectral representation of light was there all the time. But I only really took advantage of it in the atmosphere model. Not any more! This is probably the best rendering out of ToyTrace so far

Check if physics are working as intended. The beam is supposed to be focused like that. I let the construction of the scene be guided by the so called Lensmaker's equation https://en.wikipedia.org/wiki/Lens_(opt ... s_equation. More or less brute-force monte-carlo SSS. Spectral rendering! The spectral representation of light was there all the time. But I only really took advantage of it in the atmosphere model. Not any more! This is probably the best rendering out of ToyTrace so far

Very cool! I love the volumetric caustics in the lens image.